GitHub |
您所在的位置:网站首页 › enabled disable › GitHub |
Ex "Roop-GE" (GE - Gourieff Edition, aka "NSFW-Roop"), the extension was renamed with the version 0.3.0 Repository old link: https://github.com/Gourieff/sd-webui-roop-nsfw Installation | Usage | Troubleshooting | Updating | ComfyUI | DisclaimerAutomatic1111 | Vladmandic SD.Next | Google Colab SD WebUI If you use AUTOMATIC1111 web-ui: (For Windows Users): Install Visual Studio 2022 (Community version, for example - you need this step to build some of dependencies): https://visualstudio.microsoft.com/downloads/ OR only VS C++ Build Tools (if you don't need the whole Visual Studio) and select "Desktop Development with C++" under "Workloads -> Desktop & Mobile": https://visualstudio.microsoft.com/visual-cpp-build-tools/ OR if you don't want to install VS or VS C++ BT - follow this steps (sec. VIII) In web-ui, go to the "Extensions" tab and use this URL https://github.com/Gourieff/sd-webui-reactor in the "Install from URL" tab and click "Install" Please, wait for several minutes until the installation process will be finished Check the last message in your SD-WebUI Console: If you see the message "--- PLEASE, RESTART the Server! ---" - so, do it, stop the Server (CTRL+C or CMD+C) and start it again - or just go to the "Installed" tab (if you have any other Roop-based extension enabled - disable it, otherwise this extension won't work), click "Apply and restart UI" If you see the message "Done!", just go to the "Installed" tab (if you have any other Roop-based extension enabled - disable it, otherwise this extension won't work), click "Apply and restart UI" - or you can just simply reload the UI Enjoy!If you use SD.Next: Close (stop) your SD WebUI Server if it's running (For Windows Users) See the 1st step for Automatic1111 (if you followed this steps (sec. VIII) instead - go to the Step 5) Go to (Windows)automatic\venv\Scripts or (MacOS/Linux)automatic/venv/bin, run Terminal or Console (cmd) for that folder and type activate Run pip install insightface==0.7.3 Run SD.Next, go to the "Extensions" tab and use this URL https://github.com/Gourieff/sd-webui-reactor in the "Install from URL" tab and click "Install" Please, wait for several minutes until the installation process will be finished Check the last message in your SD.Next Console: If you see the message "--- PLEASE, RESTART the Server! ---" - so, do it, stop the Server (CTRL+C or CMD+C) and start it again - or just go to the "Installed" tab (if you have any other Roop-based extension enabled - disable it, otherwise this extension won't work), click "Restart the UI" Stop SD.Next, go to the automatic\extensions\sd-webui-reactor directory - if you see there models\roop folder with the file inswapper_128.onnx, just move the file to the automatic\models\roop folder Run your SD.Next WebUI and enjoy!If you use Cagliostro Colab UI: In active WebUI, go to the "Extensions" tab and use this URL https://github.com/Gourieff/sd-webui-reactor in the "Install from URL" tab and click "Install" Please, wait for several minutes until the installation process will be finished When you see the message "--- PLEASE, RESTART the Server! ---" (in your Colab Notebook Start UI section "Start Cagliostro Colab UI") - just go to the "Installed" tab and click "Apply and restart UI" (if you have any other Roop-based extension enabled - disable it before restart, otherwise this extension won't work) Enjoy! UsageUsing this software you are agree with disclaimer Under "ReActor" drop-down menu, import an image containing a face; Turn on the "Enable" checkbox; That's it, now the generated result will have the face you selected.You can use ReActor with Webui API: Check the SD Web API Wiki for how to use API; Call requests.get(url=f'{address}/sdapi/v1/script-info') to find the args that ReActor needs; Define ReActor script args and add like this "alwayson_scripts": {"reactor":{"args":args}} in the payload; Call the API, there's a full usage example in the example folder. The result face is blurryUse the "Restore Face" option. You can also try the "Upscaler" option or for more finer control, use an upscaler from the "Extras" tab.
You can also set the postproduction order (from 0.1.0 version):
The old logic was the opposite (Upscale -> then Restore), resulting in worse face quality (and big texture differences) after upscaling. There are multiple faces in resultSelect the face numbers you wish to swap using the "Comma separated face number(s)" option for swap-source and result images. You can use different index order.
This means roop detected that your image is NSFW. You can choose to activate the swap on the source image or on the generated image, or on both using the checkboxes. Activating on source image allows you to start from a given base and apply the diffusion process to it. Inpainting should work but only the masked part will be swapped. TroubleshootingI. "You should at least have one model in models directory" Please, check the path where "inswapper_128.onnx" model is stored. It must be inside the folder stable-diffusion-webui\models\roop. Move the model there if it's stored in a different directory. II. Any problems with installing Insightface or other dependencies (for Mac M1/M2 users) If you get errors when trying to install Insightface - please read #42 (for Windows Users) If you have VS C++ Build Tools or MS VS 2022 installed but still have a problem, then try the next step: Close (stop) your SD WebUI Server and start it again(for Any OS Users) If the problem still there, then do the following: Close (stop) your SD WebUI Server if it's running Go to (Windows)venv\Lib\site-packages folder or (MacOS/Linux)venv/lib/python3.10/site-packages If you see any folders with names start from ~ (e.g. "~rotobuf") - delete them Go to (Windows)venv\Scripts or (MacOS/Linux)venv/bin Run Terminal or Console (cmd) for that folder and type activate Update your pip at first: pip install -U pip Then one-by-one: pip install insightface==0.7.3 pip install onnx==1.14.0 pip install onnxruntime==1.15.0 pip install opencv-python==4.7.0.72 pip install tqdm Type deactivate, you can close your Terminal or Console and start your SD WebUI, ReActor should start OK - if not, welcome to the Issues section.III. "TypeError: UpscaleOptions.init() got an unexpected keyword argument 'do_restore_first'" First of all - you need to disable any other Roop-based extensions: Go to 'Extensions -> Installed' tab and uncheck any Roop-based extensions except this one![]() Alternative solutions: #3 (comment) #39 (comment) (can be actual, if you use Vladmandic SD.Next)IV. "AttributeError: 'FaceSwapScript' object has no attribute 'enable'" You need to disable the "SD-CN-Animation" extension (or perhaps some another that causes the conflict) V. "INVALID_PROTOBUF : Load model from \models/roop\inswapper_128.onnx failed:Protobuf parsing failed" This error may occur if there's smth wrong with the model file inswapper_128.onnx Try to download it manually from here and put it to the stable-diffusion-webui\models\roop replacing existing one VI. "ValueError: This ORT build has ['TensorrtExecutionProvider', 'CUDAExecutionProvider', 'CPUExecutionProvider'] enabled" Close (stop) your SD WebUI Server if it's running Go to the (Windows)venv\Lib\site-packages or (MacOS/Linux)venv/lib/python3.10/site-packages and see if there are any folders with names start from "~" (for example "~rotobuf"), delete them Go to the (Windows)venv\Scripts or (MacOS/Linux)venv/bin run Terminal or Console (cmd) there and type activate Then: python -m pip install -U pip pip uninstall -y onnx onnxruntime onnxruntime-gpu onnxruntime-silicon pip install onnx==1.14.0 onnxruntime==1.15.0If it didn't help - it seems that you have another extension reinstalling onnxruntime when SD WebUI checks requirements. Please see your extensions list. If you find there "WD14 tagger" - try to disable it and then follow the steps above once again. This extension causes reinstalling of onnxruntime to onnxruntime-gpu every time SD WebUI runs. VII. "ImportError: cannot import name 'builder' from 'google.protobuf.internal'" Close (stop) your SD WebUI Server if it's running Go to the (Windows)venv\Lib\site-packages or (MacOS/Linux)venv/lib/python3.10/site-packages and see if there are any folders with names start from "~" (for example "~rotobuf"), delete them Go to the "google" folder (inside the "site-packages") and delete any folders there with names start from "~" Go to the (Windows)venv\Scripts or (MacOS/Linux)venv/bin run Terminal or Console (cmd) there and type activate Then: python -m pip install -U pip pip uninstall protobuf pip install protobuf==3.20.3If this method doesn't help - there is some other extension that has a higher version of protobuf dependence and SD WebUI installs it on a startup requirements check VIII. (For Windows users) If you still cannot build Insightface for some reasons or just don't want to install Visual Studio or VS C++ Build Tools - do the following: Close (stop) your SD WebUI Server if it's running Download and put prebuilt Insightface package into the stable-diffusion-webui (or SD.Next) root folder (where you have "webui-user.bat" file) From stable-diffusion-webui (or SD.Next) root folder run CMD and .\venv\Scripts\activate Then update your PIP: python -m pip install -U pip Then install Insightface: pip install insightface-0.7.3-cp310-cp310-win_amd64.whl Enjoy!IX. 07-August Update problem If after git pull you see the message: Merge made by the 'recursive' strategy and then when you check git status you see Your branch is ahead of 'origin/main' by Please do the next: Inside the folder extensions\sd-webui-reactor run Terminal or Console (cmd) and then: git reset f48bdf1 --hard git pullOR Just delete the folder sd-webui-reactor inside the extensions directory and then run Terminal or Console (cmd) and type git clone https://github.com/Gourieff/sd-webui-reactor UpdatingA good and quick way to check for Extensions updates: https://github.com/Gourieff/sd-webui-extensions-updater ComfyUIYou can use ReActor with ComfyUI For the installation instruction follow the ReActor Node repo DisclaimerThis software is meant to be a productive contribution to the rapidly growing AI-generated media industry. It will help artists with tasks such as animating a custom character or using the character as a model for clothing etc. The developers of this software are aware of its possible unethical applicaitons and are committed to take preventative measures against them. We will continue to develop this project in the positive direction while adhering to law and ethics. Users of this software are expected to use this software responsibly while abiding the local law. If face of a real person is being used, users are suggested to get consent from the concerned person and clearly mention that it is a deepfake when posting content online. Developers and Contributors of this software are not responsible for actions of end-users. By using this extension you are agree not to create any content that: violates any laws; causes any harm to a person or persons; propogates (spreads) any information (both public or personal) or images (both public or personal) which could be meant for harm; spreads misinformation; targets vulnerable groups of people. |
CopyRight 2018-2019 办公设备维修网 版权所有 豫ICP备15022753号-3 |